RE 15025 ISB Thrust roller bearing

T min.:-20 °C; A:25.5 mm; A2:31 mm; A1:12 mm; N:10mm; T max.:200 °C; C:9.55 kN; G:M6x1; e:15 mm; C0:4.78 kN;

T min.:-20 °C; C:19 mm; D:62 mm; m:5 mm; r:1.5; G:1/4-28UNF; B:38.1 mm; C1:5.1 mm; T max.:100 °C; d:28.58 mm;

Characteristic rolling element frequency, BSF:4.12 Hz; Min operating temperature, Tmin:-20 °C; ra max:2 mm; rs min:2.1 mm; Radial clearance class:CN; Da max:149 mm; d1:94 mm; B:37 mm; Characteristic cage frequency, FTF:0.38 Hz; Characteristic inner ring frequency, BPFI:4.92 Hz;

s1:13.5 mm; A1:9 mm; J:92 mm; A2:29 mm; C0:7.88 kN; T min.:-40 °C; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; S:7.5 mm; A:23.5 mm;

A2:54.2 mm; J:105 mm; Dz:95 mm; T min.:-40 °C; T max.:100 °C; G:R1/8"; Designation of bearing:UC209-27G2T04; e:24 mm; A1:13 mm; A:40 mm;

Designation of open end cover:SCOU209-27; L:320 mm; C0:20.8 kN; C:31.85 kN; T min.:-20 °C; Weight:3.9 kg; s1:20.6 mm; S:10.2 mm; H2:61 mm; A:31 mm;

L2:25 mm; Recommended tightening torque for set screw:27.1 Nm; G:M6x1; Designation of housing:T312-; T min.:-20 °C; N:41mm; S:26 mm; N2:71 mm; L:220 mm; C:81.6 kN;

G:M10x1,25; d1:96.8 mm; d:70 mm; T min.:-20 °C; Recommended tightening torque for set screw:22 Nm; SW:5 mm; B1:85.7 mm; B2:23.5 mm; S:34.1 mm; C0:45 kN;

H:190 mm; d1:69.9 mm; Dz:100 mm; Designation of closed end cover:SCCE210; s1:33.4 mm; S:10 mm; Designation of housing:SFL210N-; C0:23.7 kN; e:22 mm; B1:43.7 mm;

Ca min:4.67 mm; D3 max:76.81 mm; rNs min:0.5 mm; b min:1.9 mm; D1:70.4 mm; Db min:88 mm; da max:50.3 mm; Characteristic outer ring frequency, BPF0:3.61 Hz; da min:46.5 mm; Characteristic inner ring frequency, BPFI:5.39 Hz;

T min.:-20 °C; Designation of bearing:UC205-14G2L4; Recommended tightening torque for set screw:3.7 Nm; s1:17 mm; Weight:0.81 kg; A:38 mm; C:14 kN; L1:42 mm; G:M6x1; N:13mm;

s1:15.5 mm; T max.:200 °C; C0:6.65 kN; Recommended tightening torque for set screw:3.7 Nm; H:89 mm; S:12.7 mm; d:19.05 mm; C:12.8 kN; A:32 mm; L1:61 mm;

Rolling Element:Ball Bearing; B:35 mm; Outer Race Width:1.378 Inch | 35 Mill; cage material:Brass; Da max:139 mm; fillet radius:2.1 mm; Nlim (grease):4,600 rpm; maximum rpm (grease):4600 rpm; Keyword String:Ball; bore type:Round;

s1:53.2 mm; H1:25 mm; A1:40 mm; J:105 mm; N:M16; d1:82 mm; A:70 mm; H2:138 mm; C0:32.8 kN; H:69.8 mm;

Designation of housing:F212N-; C0:32.8 kN; A2:68.7 mm; N:19mm; e:29 mm; S:25.4 mm; A:48 mm; L:175 mm; T max.:100 °C; T min.:-20 °C;